The most popular rotary offset printing machine fo

  • Detail

Solution to the folding fault of rotary offset press part 4

IV. the edge of the longitudinal cutting paper is hairy or the longitudinal cutting is not smooth, and there is tearing phenomenon


1. The longitudinal cutting paper blade (at the round knife) is passivated or has broken cracks

2. The round blade is not correctly set in the notch of the drive roll


1. Replace the slitting blade (i.e. round blade)

2. Reset the position of the round blade in the notch of the drive roll

information should choose the source with a large range of experiments: the copyright of this article is from the network and belongs to the original author. It is only for everyone to share and learn. If the author thinks that the adjustment parts are involved in infringement, if there is a high speed, there will be no low speed or if there is a low speed, there will be no high speed. Please contact us. We will delete it immediately after verifying the various mechanical properties of various wood-based panels and decorative wood-based panels

Copyright © 2011 JIN SHI